| Part |
Manufacturer |
Description |
| DES535BB LB |
|
535 cid BB Chevy
Long Block |
| Block |
427 Tall Deck |
NEW 4 Bolt, decked w/BHJ fixture, bored
to 4.350, clearanced for crank and rod, honed w/BHJ torque plates,
brass freeze plugs and cam bearings installed, left hand dipstick, painted black standard,
assembled |
| Crank |
Scat |
43400 forged
steel, 4.5" stroke, internally balanced
crankshaft |
| Pistons |
SRP |
Forged 2618 alloy,
hollow dome, 13.1:1 w/118cc pistons. (See
optional upgrade below). |
| Rings |
Lunati |
Plasma moly, non-file fit |
| Rods |
Lunati |
6.535" length
I-Beam, forged 4340 Pro Mod rod |
| Bearings |
King |
High performance cam, rod and main
bearings |
| Heads |
Edelbrock |
Victor JR Aluminum
Rectabgular port, CNC proted 112cc chambers, 320
cc intake ports, 2.25" intake & 1.90" exhaust
valves, no springs or retainers included. |
| Pushrods |
Manley |
3/8 diameter chromemoly hardened
one piece |
| Rocker Arms |
Lunati |
Aluminum Full
Roller rockers, 7/16 stud 1.7 ratio |
| Cam & Lifters |
Lunati |
Roller (per
customer requirements) |
| Bolts |
ARP |
ARP high performance head
bolts and main studs |
| Timing Set |
Cloyes |
True roller chain
and gears 3 way crank gears |
| Gaskets |
Felpro/Detroit |
High performance,
mixed set and rear main seal |
| Oil Pan |
Milodon |
7
quart low profile plus filter, 8 1/2" deep sump gold irridated finish |
| Oil Pump |
Melling |
High volume pump |
| Pump Drive |
Melling |
Heavy duty shaft
with steel sleeve |
| Pump Pickup |
Milodon |
Heavy duty pickup,
engineered specifically for Milodon pan |
| Windage Tray |
Milodon |
Solid,
louvered windage tray |
| Balancer |
|
SFI approved,
fluid filled with timing marks |
| Flexplate |
|
SFI approved, 168
teeth steel flexplate |
| Hardware |
Hardware |
Misc. hardware, oil
pump stud, dowel pins, cam bolts, oil pan bolts,
timing cover bolts |
| Hardware |
Hardware |
Cam bolts & lock
plate w/button, oil screen kit, etc. |
| Freeze Plugs |
Pioneer |
Brass freeze plugs |
| Balance |
|
Internal high performance street/strip, piston and rods matched +- 1 gram
|
Optional
Piston Upgrade:
SRP 10.3:1cr or Lunati
9.1:1cr
ADD $60.00 |
|
Motor completely assembled. |
| All motors require 50% deposit to begin building and balance paid prior to shipping. All motors are shipped
in continental USA excluding Alaska for $250.00 additional. Warranty is provided by manufacturer if a warranty exists. These motors are
custom built for each customer and are considered race only, non-emissions compliant, and customer assumes all liability while operating. |
