| Part |
Manufacturer |
Description |
| |
|
500+ HP - 420 Stroker Motor
Long Block Assembly |
| Block |
World Motown |
NEW
4 Bolt, decked w/BHJ fixture, bored, honed w/BHJ torque plates,
brass freeze plugs and cam bearings installed,
right hand dipstick, painted black standard |
| Crank |
DES |
Forged 4340 steel,
3.875" stroke, 2 piece rear seal |
| Pistons |
Ross |
Forged flat top,
10.3 compression w/76cc head |
| Rings |
Lunati |
Plasma moly,
non-file fit |
| Rods |
DES |
6.0" H-Beam, forged 4340 steel, full floating pin,
ARP cap screws |
| Bearings |
Clevite 77 |
High performance
'H' cam, rod and main bearings |
| Heads |
AFR |
210cc Race Head, aluminum,
straight plug, standard exhaust pattern, 76cc, 2.08 and 1.60 valves, 10 degree retainers and keepers, CNC ported combustion chamber, intake and exhaust ports, up to .670" lift,
roller springs, complete heads |
| Rocker Arms |
Scorpion |
Aluminum, roller
rocker, 1.5 ratio, 7/16" stud |
| Pushrods |
Trick Flow |
High performance, hardened,
one-piece chromemoly, 5/16" |
| Cam & Lifters |
Lunati |
Solid flat tappet,
custom per application |
| Bolts |
ARP |
High performance
head and main studs, all new engine bolts used |
| Timing Chain |
Cloyes |
True roller, 3 way
crank sprocket, seamless roller chain |
| Timing Cover |
Milodon |
Gold anodized
stamped steel |
| Gaskets |
Felpro/Corteco |
High performance, mixed set, one piece oil pan gasket |
| Oil Pan |
Milodon |
Low profile 7 quart
+ filter, 8.25" deep sump, gold irridated finish |
| Oil Pump |
Melling |
High Volume M55HV |
| Pump Drive |
Melling |
Heavy duty with steel bushing |
| Pump Pickup |
Milodon |
Heavy duty pickup,
specifically for Milodon pan |
| Dampner |
Pioneer |
SFI approved steel
style internal balance |
| Flexplate |
Scat |
SFI approved, 350,
internal balance, 168 teeth, 14.13" diameter |
| Balance |
|
High performance
street/strip, piston and rods matched +- 1 gram |
|
Optional
Upgrades:
Scat 4340 Nitride Crank ADD $165.00
Lunati Pro Mod 6.0" Rods
ADD $380.00
Ross 11.0:1cr @ &70cc Pistons ADD $65.00
AFR Competition CNC Strip Porting
ADD $500.00
AFR 215cc Raised Runner Heads
ADD $1,650.00
Roller cam & lifters
ADD $525.00 |
|
Motor completely assembled. |
| All motors require 50% deposit to begin building and balance paid prior to shipping. All motors are shipped
in continental USA excluding Alaska for $250.00 additional. Warranty is provided by manufacturer if a warranty exists. These motors are
custom built for each customer and are considered race only, non-emissions compliant, and customer assumes all liability while operating. |
