| Part |
Manufacturer |
Description |
| Block |
DES |
2 Bolt, seasoned core, cleaned, magnafluxed, decked w/BHJ fixture, bored, honed w/BHJ torque plates,
brass freeze plugs and cam bearings installed, painted
Ford Blue |
| Crank |
DES |
New, nodular iron, 3.400" stroke |
| Pistons |
Federal
Mogul |
Hypereutectic flat top 10.5:1 cr w/60cc heads |
| Rings |
Lunati |
Moly, non-file fit |
| Rods |
DES |
5.400" I-beam, 5140 steel stock replacement w/ARP bolts & .927 pin |
| Bearings |
Clevite |
Cam, rod and main bearings |
| Heads |
Trick
Flow |
Track Heat 61cc cylinder heads feature 2.02 and 1.60 one pc stainless
steel valves, 1.47" valve springs. 7 degree machined keepers and retainers
Will handle up to .625" lift w/flat top piston |
| Rocker
Arms |
Cat |
Aluminum full roller, 1.6 ratio, 3/8" stud |
| Pushrods |
Pioneer |
5/16 Chromemoly, hardened 1 pc |
| Cam & Lifters |
Lunati |
Hydraulic flat tappet, lift & duration selected to your specs |
| Bolts |
Pioneer |
Hi Performance head/main bolts & misc. engine bolts |
| Timing Chain |
Melling |
Double roller, 3 way crank sprocket |
| Gaskets |
Felpro |
High performance, mixed set, one piece oil pan gasket |
| Oil Pan |
Milodon |
Stock replacement, gold finish |
| Oil Pump |
Melling |
High Volume |
| Pump Drive |
Melling |
Heavy duty |
| Pump Pickup |
Milodon |
Standard screen,
bolted to pump |
| Dampner |
Pioneer |
OEM style elastic balancer
28 oz |
| Flexplate |
Scat |
28oz, 164 teeth, 14.2" diameter |
| Balance
Job |
DES
done in house |
High performance
street/strip, piston and rods matched +- 1 gram |
|
Engine
completely assembled. All parts available separately |
| All motors require 50% deposit to begin building and balance paid prior to shipping. All motors are shipped
in continental USA excluding Alaska for $250.00 additional. Warranty is provided by manufacturer if a warranty exists. These motors are
custom built for each customer and are considered race only, non-emissions compliant, and customer assumes all liability while operating. |
